Chris' Build

Show us your grinder!
Post Reply
C.J
Posts: 6
Joined: Fri Aug 16, 2019 4:12 am

Chris' Build

Post by C.J » Mon Sep 09, 2019 3:12 am

I picked up my metric conversion of parts today from the water jet / laser cutters.

I will hopefully have the metric files to upload for you shortly.

Image
Image
Image

Simko
Posts: 20
Joined: Wed Jan 17, 2018 2:03 pm

Re: Chris' Build

Post by Simko » Mon Sep 16, 2019 1:54 pm

The parts look great! 8-)

Looks like you have multiple options for the spacers (steel and aluminum).

Were they able to jet the part with the two holes and the angled cuts to the long edge. If so, that is awesome as making that cut with a bandsaw sucked.

C.J
Posts: 6
Joined: Fri Aug 16, 2019 4:12 am

Re: Chris' Build

Post by C.J » Wed Sep 18, 2019 8:56 am

Simko wrote:
Mon Sep 16, 2019 1:54 pm
The parts look great! 8-)

Looks like you have multiple options for the spacers (steel and aluminum).

Were they able to jet the part with the two holes and the angled cuts to the long edge. If so, that is awesome as making that cut with a bandsaw sucked.
Yeah all the alloy was water jet. No bandsaw required. The steel was laser cut. They did forget to cut one of the tracking wheel pieces, but I had them do that for me.
I'm still in the process of getting fixings and stuff together.
I'm still searching for a suitable wheel set also.

Hopefully I can have this sorted In the next few weeks

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests