Show us your grinder!
-
C.J
- Posts: 6
- Joined: Fri Aug 16, 2019 4:12 am
Post
by C.J » Mon Sep 09, 2019 3:12 am
I picked up my metric conversion of parts today from the water jet / laser cutters.
I will hopefully have the metric files to upload for you shortly.

-
Simko
- Posts: 20
- Joined: Wed Jan 17, 2018 2:03 pm
Post
by Simko » Mon Sep 16, 2019 1:54 pm
The parts look great!
Looks like you have multiple options for the spacers (steel and aluminum).
Were they able to jet the part with the two holes and the angled cuts to the long edge. If so, that is awesome as making that cut with a bandsaw sucked.
-
C.J
- Posts: 6
- Joined: Fri Aug 16, 2019 4:12 am
Post
by C.J » Wed Sep 18, 2019 8:56 am
Simko wrote: ↑Mon Sep 16, 2019 1:54 pm
The parts look great!
Looks like you have multiple options for the spacers (steel and aluminum).
Were they able to jet the part with the two holes and the angled cuts to the long edge. If so, that is awesome as making that cut with a bandsaw sucked.
Yeah all the alloy was water jet. No bandsaw required. The steel was laser cut. They did forget to cut one of the tracking wheel pieces, but I had them do that for me.
I'm still in the process of getting fixings and stuff together.
I'm still searching for a suitable wheel set also.
Hopefully I can have this sorted In the next few weeks
Who is online
Users browsing this forum: No registered users and 2 guests