Which set/size of wheels should I get

Discussion on where to source parts and services for your build.
Post Reply
SpecialEd
Posts: 3
Joined: Wed Jul 12, 2017 5:30 pm

Which set/size of wheels should I get

Post by SpecialEd » Wed Jul 18, 2018 5:00 am

Good morning, Folks!

Well, my build is coming right along, but I'm unsure on what wheels I should get. I've seen ameribrade sets, but I'm not sure what size motor wheel I should get for my set up for my 2HP 3600RPM motor.

I've already purchase a motor and VFD.

Motor-3600RPM, 2Hp ( I know I will only get 1.5hp seeing that I'm power my VFD with 120V)
https://www.automationdirect.com/adc/Sh ... -002-3BD36

VFD
https://www.amazon.com/gp/product/B01AO ... UTF8&psc=1

Any suggestions will be greatly appreciated!!!

fernandomaia
Posts: 8
Joined: Mon Jul 09, 2018 11:09 am

Re: Which set/size of wheels should I get

Post by fernandomaia » Sat Jul 28, 2018 3:32 pm

The larger is faster, but you loose power. Im going to use 120mm.
120mm drive is 0.06m x 2 x 3.14 x 3500/60 = 22m / s

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest