207 AND 208 HOLE PLACEMENTS

Discussion of mechanical, frame, geometry, fasteners etc.
Post Reply
mgsntx32
Posts: 1
Joined: Wed Dec 13, 2017 6:59 am

207 AND 208 HOLE PLACEMENTS

Post by mgsntx32 » Wed Dec 13, 2017 3:42 pm

There may be a problem with parts 207 & 208

the hole spacing for the holes that mount right and left frame are 1.7718 apart. in order to maintain 1.53125 spacing and to intersect the middle of the 0.375 plates they should be 1.9063 apart. this can be corrected by moving the holes farthest from the pivot hole, 0.1875 closer to the edge. they are currently 0.375 which doesn't work. i did not check the individual drawings, only the ones in the 375 cut with spacers file.

srice
Posts: 21
Joined: Tue Aug 22, 2017 6:23 pm

Re: 207 AND 208 HOLE PLACEMENTS

Post by srice » Sat Dec 23, 2017 10:54 am

mgsntx32 wrote:
Wed Dec 13, 2017 3:42 pm
There may be a problem with parts 207 & 208

the hole spacing for the holes that mount right and left frame are 1.7718 apart. in order to maintain 1.53125 spacing and to intersect the middle of the 0.375 plates they should be 1.9063 apart. this can be corrected by moving the holes farthest from the pivot hole, 0.1875 closer to the edge. they are currently 0.375 which doesn't work. i did not check the individual drawings, only the ones in the 375 cut with spacers file.
Thanks for finding that. I have fixed that and I have one more change that I would to confirm and then I will send new files to Dan.

ElijahTyler
Posts: 2
Joined: Sun Dec 24, 2017 12:30 pm

Re: 207 AND 208 HOLE PLACEMENTS

Post by ElijahTyler » Thu Dec 28, 2017 5:39 pm

Have the final plans been posted with revisions for the Dc1 10/11 with Standard measurements? Thank you in advance.

User avatar
admin
Site Admin
Posts: 103
Joined: Wed Jul 05, 2017 8:03 am

Re: 207 AND 208 HOLE PLACEMENTS

Post by admin » Fri Dec 29, 2017 8:06 am

Steve has updated files here:
viewtopic.php?f=10&t=135&p=370

ElijahTyler
Posts: 2
Joined: Sun Dec 24, 2017 12:30 pm

Re: 207 AND 208 HOLE PLACEMENTS

Post by ElijahTyler » Sat Dec 30, 2017 9:54 pm

Sorry for the redundancy, but are those dxfs in Steve's zip file for the 10 or 11" version? Thanks in advance!

srice
Posts: 21
Joined: Tue Aug 22, 2017 6:23 pm

Re: 207 AND 208 HOLE PLACEMENTS

Post by srice » Wed Jan 03, 2018 6:02 pm

I worked from the original files for the 11"

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest