how to modify for this engine

Suggest ideas for attachments, safety, or overall design improvements.
Post Reply
mauricio
Posts: 3
Joined: Wed Jun 13, 2018 9:34 am

how to modify for this engine

Post by mauricio » Wed Jun 13, 2018 1:54 pm

I have siemens engines like this image, the terminal is up near the axisImage

mauricio
Posts: 3
Joined: Wed Jun 13, 2018 9:34 am

Re: how to modify for this engine

Post by mauricio » Wed Jun 13, 2018 1:55 pm

Image

User avatar
admin
Site Admin
Posts: 126
Joined: Wed Jul 05, 2017 8:03 am

Re: how to modify for this engine

Post by admin » Thu Jun 14, 2018 8:12 am

Hi Mauricio,

The Sayber (like many Wilmont TAG, Reeder, Northridge Tool etc.) requires a face mounted motor. Your motor is better suited for a foot mounted application. If you wish to make a foot mounted grinder you may want to look at a basic design like the BG-272 and make the base on a hinge for vertical and horizontal belt operation. Derek Melton made one like this:
derek_m_VFD_grinder_build.jpg
derek_m_VFD_grinder_build.jpg (82.96 KiB) Viewed 187 times
You can see how he added some hinges to the base so the whole grinder can tilt, including the base and motor etc.

Regards,

Dan

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest